Small, but Mighty

Upgrade your older 3Key models to the Genesis Mini, complete with a touchscreen, Wi-Fi capability, and an easy-to-use interface. Order directly or through your favorite kiln manufacturer, technician or distributor.

Glyphicons 208 remove 2

*The Mini is a direct replacement for both the Autofire Express and Sentry Xpress. For other 3Key models, control box adjustments are needed.

Dismiss

More Kiln Products
Genesis Mini - Model 1120

Genesis Mini - Model 1120

$299

This unit comes with all the great features of the Genesis but in a small package, with a modern and intuitive design. But, because results are what counts, this one also includes the knowledge that is at the heart of every Bartlett controller. We design, manufacture and sell all of our controllers with our customers at the forefront of that process and we insist on procedures and systems to continue to be a reliable and consistent resource for artists. The control strategies that have produced so many successful firings with Bartlett controllers will only be enhanced by this new format of display and user interface.
**The model 1120 directly replaces the Autofire®️ Express and Sentry Xpress controllers. For all other 3Key models, hardware manipulation is needed to due to slight sizing differences.

  • This controller will make firing kilns just a little bit easier in these ways:
    *touch-screen technology for the user interface
    *easy-to-follow screen descriptions
    *different user-interface levels, which can be set to match the user’s firing knowledge
    *graphical display of the firing process right at the controller
    *Store up to 12 custom user programs
    *Up to 32 segments per program
    *Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
    *Built in diagnostics testing for use with a current sensor
    *Alarm
    *Error Codes
    *WiFi enabled for easy software updating
    *Register your Genesis on our web site or mobile app for remote monitoring of your kiln
    *Use for single zone kilns only

  • Circuit board size 4.75” x 2.5”
    Panel size 5.5” x 3.25”
    ACCURACY +/- 10°F
    THERMOCOUPLE INPUT Available for Type K, S, or R
    TEMPERATURE SCALE °F or °C
    COLD JUNCTION COMPENSATION Electronic
    POWER INPUT 24V Center Tap Transformer
    OUTPUTS 1 AND SAFETY 500 mA at 12V; Five 12V Relays with 80 OHM Coil
    OPERATING TEMPERATURE RANGE 0 TO 160° F or 0 to 71° C
  • ConeFire Firing Profiles Glyphicons 447 floppy save

    Glass Firing Profiles Glyphicons 447 floppy save

    User Manual Glyphicons 447 floppy save

    Software Revision Log Glyphicons 447 floppy save

This controller will make firing kilns just a little bit easier in these ways:
*touch-screen technology for the user interface
*easy-to-follow screen descriptions
*different user-interface levels, which can be set to match the user’s firing knowledge
*graphical display of the firing process right at the controller
*Store up to 12 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating
*Register your Genesis on our web site or mobile app for remote monitoring of your kiln
*Use for single zone kilns only

Circuit board size 4.75” x 2.5”
Panel size 5.5” x 3.25”
ACCURACY +/- 10°F
THERMOCOUPLE INPUT Available for Type K, S, or R
TEMPERATURE SCALE °F or °C
COLD JUNCTION COMPENSATION Electronic
POWER INPUT 24V Center Tap Transformer
OUTPUTS 1 AND SAFETY 500 mA at 12V; Five 12V Relays with 80 OHM Coil
OPERATING TEMPERATURE RANGE 0 TO 160° F or 0 to 71° C
ConeFire Firing Profiles Glyphicons 447 floppy save
Glass Firing Profiles Glyphicons 447 floppy save
User Manual Glyphicons 447 floppy save
Software Revision Log Glyphicons 447 floppy save

We pride ourselves in quality products & service.

Contact Us