Small, but Mighty
Upgrade your older 3Key models to the Genesis Mini, complete with a touchscreen, Wi-Fi capability, and an easy-to-use interface. Order directly or through your favorite kiln manufacturer, technician or distributor.
Upgrade your older 3Key models to the Genesis Mini, complete with a touchscreen, Wi-Fi capability, and an easy-to-use interface. Order directly or through your favorite kiln manufacturer, technician or distributor.
*The Mini is a direct replacement for both the Autofire Express and Sentry Xpress. For other 3Key models, control box adjustments are needed.
For new purchases, please see the Genesis 2.0 for information - this model has been discontinued in favor of the Genesis 2.0.
This unit will be the next generation of kiln controllers with its modern and intuitive user platform. But, because results are what counts, this one also includes the knowledge that is at the heart of every Bartlett controller. We design, manufacture and sell all of our controllers with our customers at the forefront of that process and we insist on procedures and systems to continue to be a reliable and consistent resource for artists. The control strategies that have produced so many successful firings with Bartlett controllers will only be enhanced by this new format of display and user interface.
This controller will make firing kilns just a little bit easier in these ways:
*touch-screen technology for the user interface
*easy-to-follow screen descriptions
*different user-interface levels, which can be set to match the user’s firing knowledge
*graphical display of the firing process right at the controller
*Store up to 30 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating
*Register your Genesis on our web site or mobile app for remote monitoring of your kiln
Circuit board size | 3.625” x 4.5” |
Panel size | 5” x 6” |
Screen Size: | 3.2 inch color display |
ACCURACY | +/- 10°F |
THERMOCOUPLE INPUT | Available for Type K, S, or R |
TEMPERATURE SCALE | °F or °C |
COLD JUNCTION COMPENSATION | Electronic |
POWER INPUT | 24V Center Tap Transformer |
OUTPUTS 1, 2, 3, 4, AND SAFETY | 500 mA at 12V; Five 12V Relays with 80 OHM Coil |
OPERATING TEMPERATURE RANGE | 0 TO 160° F or 0 to 71° C |
Connection Type | 1/4" Push-on Tab *Insulation Displacement Connector (IDC) available upon request |
This controller will make firing kilns just a little bit easier in these ways:
*touch-screen technology for the user interface
*easy-to-follow screen descriptions
*different user-interface levels, which can be set to match the user’s firing knowledge
*graphical display of the firing process right at the controller
*Store up to 30 custom user programs
*Up to 32 segments per program
*Ability to make adjustment during a firing such as add segments, add temperature, and skip segments
*Built in diagnostics testing for use with a current sensor
*Alarm
*Error Codes
*WiFi enabled for easy software updating
*Register your Genesis on our web site or mobile app for remote monitoring of your kiln
Circuit board size | 3.625” x 4.5” |
Panel size | 5” x 6” |
Screen Size: | 3.2 inch color display |
ACCURACY | +/- 10°F |
THERMOCOUPLE INPUT | Available for Type K, S, or R |
TEMPERATURE SCALE | °F or °C |
COLD JUNCTION COMPENSATION | Electronic |
POWER INPUT | 24V Center Tap Transformer |
OUTPUTS 1, 2, 3, 4, AND SAFETY | 500 mA at 12V; Five 12V Relays with 80 OHM Coil |
OPERATING TEMPERATURE RANGE | 0 TO 160° F or 0 to 71° C |
Connection Type | 1/4" Push-on Tab *Insulation Displacement Connector (IDC) available upon request |
Software Revision Log | |
User Manual | |
Glass Firing Profiles | |
ConeFire Firing Profiles | |
Technical Manual |