Features of the Model V6-CF Controller
Firing Methods and Features which make firing easier:
- CONE FIRE METHOD - use when firing to a specific cone number using one of four speeds, "Slow Bisque", "Fast Bisque", "Slow Glaze", or "Fast Glaze".
- VARY-FIRE PROGRAMMER - Program up to 6 separate firing profiles for repeated use. Each profile may have up to 8 segments with separate heating or cooling rates, temperature set-points, and hold times. Use RECALL PROGRAM button to recall any firing program with one button ease.
- DELAY START - Delay the start of your firing up to 99 hours and 99 minutes.
- PREHEAT - Used with CONE FIRE method to hold a temperature of 200 °F for a specified time prior to starting the firing. This can be used for drying ware.
- ALARM - User set audible temperature alarm.
Advanced features:
- CONE OFFSET - Used to raise or lower the final temperature of any cone to fine tune the controller to your kiln.
- SKIP STEP -Skip from the present segment to the next ramp.
- ERROR CODES - Error codes may be turned on so the kiln will automatically shut down if there is an error. They may be turned off for special firing profiles.
- 16 SEGMENT PROGRAMS - User programs 5 and 6 can be combined for a 16 segment program.
Messages and information:
- REVIEW PROGRAM - Review your firing profile any time before or during the firing.
- VIEW SEGMENT - View the current segment or skip to the next segment.
- CONE TABLE - Easily look up temperature and cone number equivalents.
- °F or °C - Choose between FARENHEIT or CELCIUS temperature scales.
Communicates with personal computer equipped with KISS software.