More Kiln Products
V6-CF

V6-CF

$360.00

The V6-CF is Bartlett Instrument Company's fifth generation kiln controller. Each generation has improved the reliability, features and ease-of-use to make Bartlett Instrument Company's kiln controllers the most accepted on the market. With the V6-CF cone-fire method, you select 1 of the 4 firing speeds and your cone number and you're firing your ceramics with as few as 6 key presses! The vary-fire method gives you the freedom to create up to six, 8-step user programs to fire your ceramics, crystalline glazes, glass or jewelry. Other features include delay start, preheat, alarm, cone adjustments, thermocouple adjustments, °F or °C operation, 16 segment program, and skip step. Advanced features of the V6-CF's include 3-zone control and KISS (kiln interface software system) for remote programming and data collection from a personal computer!

  • 24-key membrane switch keypad
    Selectable # of Zones (or Thermocouples), from 1 to 3
    PID control algorithm
    Can store up to 6 Ramp/Hold programs (last fired program remains in memory)
    8 Segments per program (each segment has a ramp rate to a temperature, and a soak period) , with an option to combine User programs 5 and 6 to get a 16 segment program
    Ability to Skip-Step (move from one segment to the next ramp)
    4 speeds of Preset Conefire Programs , Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze
    Ability to perform a ConeFire to RampHold firing
    Ability to perform a delayed start of the kiln
    Alarm
    Error Codes
    Computer Interface Available
  • Circuit board size 3.5” x 4.5”
    Opening size 4-1/4x 5
    Mounting holes dimension 4.6” x 5.6”
    Panel size 5” x 6”
    ACCURACY +/- 10°F
    THERMOCOUPLE INPUT Available for Type K, S or R
    TEMPERATURE SCALE °F or °C
    COLD JUNCTION COMPENSATION Electronic
    POWER INPUT 24V Center Tap Transformer
    OUTPUTS 1 & 3 150mA at 12V ; one 12 V relay with 80 Ohm coil per output
    OUTPUTS 2 & 4 600mA at 12V ; four 12 V relays with 80 Ohm coil
    OPERATING TEMPERATURE RANGE 0-125°F, or 0-52°C
    Connection Type 1/4" Push-on Tab
  • Firing Profiles Glyphicons 447 floppy save

    Technical Manual Glyphicons 447 floppy save

    Connection Diagram Glyphicons 447 floppy save

    User Manual Glyphicons 447 floppy save

  • Review & Start ConeFire Firing

    Review & Start VaryFire Firing

    Hot Keys Tutorial

    Setting an Alarm

    Full Power Test

    VaryFire Programming

    ConeFire Programming

24-key membrane switch keypad
Selectable # of Zones (or Thermocouples), from 1 to 3
PID control algorithm
Can store up to 6 Ramp/Hold programs (last fired program remains in memory)
8 Segments per program (each segment has a ramp rate to a temperature, and a soak period) , with an option to combine User programs 5 and 6 to get a 16 segment program
Ability to Skip-Step (move from one segment to the next ramp)
4 speeds of Preset Conefire Programs , Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze
Ability to perform a ConeFire to RampHold firing
Ability to perform a delayed start of the kiln
Alarm
Error Codes
Computer Interface Available
Circuit board size 3.5” x 4.5”
Opening size 4-1/4x 5
Mounting holes dimension 4.6” x 5.6”
Panel size 5” x 6”
ACCURACY +/- 10°F
THERMOCOUPLE INPUT Available for Type K, S or R
TEMPERATURE SCALE °F or °C
COLD JUNCTION COMPENSATION Electronic
POWER INPUT 24V Center Tap Transformer
OUTPUTS 1 & 3 150mA at 12V ; one 12 V relay with 80 Ohm coil per output
OUTPUTS 2 & 4 600mA at 12V ; four 12 V relays with 80 Ohm coil
OPERATING TEMPERATURE RANGE 0-125°F, or 0-52°C
Connection Type 1/4" Push-on Tab
Firing Profiles Glyphicons 447 floppy save
Technical Manual Glyphicons 447 floppy save
Connection Diagram Glyphicons 447 floppy save
User Manual Glyphicons 447 floppy save

We pride ourselves in quality products & service.

Contact Us