Bartlett Instrument Co.
Bartlett Instrument Co.

 

 

 

Features
Requirements
Manual
Sample Screens

   

"ENTERING DATA" SAMPLE
This sample screen from the CIS program shows how the user would enter the controller settings for an individual greenhouse. The user has named this greenhouse the "Germ chamber & SB". The user can either key in correct values, using the numbers on the keyboard, or can use the spin bar to the right of the field to increase or decrease the current value in the field. For example, to set the setpoint temperature for the DIF stage for zone 1, it could be increased to 72 degrees by clicking to the right of that field twice.

CIS Enter Program Sample

"Main Screen" SAMPLE
This sample screen from the CIS program shows the main screen, which gives summary information about all the controllers hooked up to the computer. Each row in the table gives the greenhouse identification, its current status, current temperatures and humidity, and whether the heats and cools are running.

CIS Main Screen Sample

"Menu Screen" SAMPLE
This sample screen from the CIS program shows the menu screen, which is the screen to enter parameter information about each controller's operation. Some examples of the types of parameters set here are: the values that would trigger temperature alarms on the low and high side; the ability to temporarily disconnect a greenhouse from the computer software; how many minutes after a user has manually turned on an appliance before it is controlled automatically again.

 

CIS Menu Screen

"Statistics Screen" SAMPLE
This sample screen from the CIS program shows one of the statistics screen. This particular example shows the average temperature for each different stage (DIF, DAY and NITE) and a 24-hour average, for the last seven days for one greenhouse. This information would be available for each greenhouse connected to the computer.

 

CIS Statistics Sample

"Status Screen" SAMPLE
This sample screen from the CIS program shows the detailed information for one of the greenhouses connected to the computer. It is similar to the look of the "Enter Program" screen, except for that no data can be entered here until the user would select "Enter New Info" in the menu bar at the top of the screen.

CIS Status Screen Sample

 

 

 

Bartlett Instrument Company information@bartinst.com


HOME | Kiln Controllers | Greenhouse Controllers | Contact Us | About Us | Employment | News
Data Logging Pyrometer | V6-CF | 3K100 | RTC1000 |KISS |Kiln Retail |GHK12X2 | GHK12X2C | GHK12X2H | GHK12X2CH | RWL11X2 | Wind Rain Alarm | EASY-WIRE | CIS | Greenhouse Order